surgicare

Vertical steam autoclave, Model No: HL-350, Approval: CE , ISO

Category: Tag:

Description

Vertical steam autoclave

Model No: HL-350

Approval: CE , ISO

  1. Cycle progresses automatically by control system through conditioning and sterilizing phases.
  2. Sterilize temperature is adjustable from 121°C to 132°C on temperature regulator. When setting temperature is achieved the process of sterilizing cycle will automatic operating.
  3. Sterilize time is adjustable from 0~60minutes on timer.
  4.  The timer starts only after the pre-set temperature is reached, ensuring complete sterilization.
  5. Illuminated pilot lamps display status and a buzzer announces the completion and cuts off the heating power source.
  6. The large diameter of pressure gauge and thermometer make ideal require reading and indicate high precision and consistent results.
  7. Integral heating system is equipped with a high efficient immersion heater and temperature switch to provide strict control of heating temperature.
  8. Steam trap discharges condensate from chamber to obtain effective saturated steam.
  9. An effective HEPA air filter is used to prevent contaminated air from entering into the chamber.
  10. Chamber door is manually operated and actuated by rotating a door handle with foot pedal to lift door up.
  11. The silicone-rubber sealing gasket is applied to an even pressure door seal.
  12. Cylindrical chamber provides a large capacity to satisfy a wide range of sterile processing needs.
  13. Chamber is made of high quality SUS 316 stainless steel with polished surface for long lasting service and easy cleaning. Chamber construction is thermally insulated with fiberglass and cover with stainless steel sheet.

Safety devices
1. Door interlock: door safety locking device keep door from being opened while chamber is pressurized during cycle.
2. Safety valve: releasing steam in case of excessive chamber pressure.
3. Overheating protection device: high temperature deviation in chamber actuates protective device cuts off the heating source immediately.
4. Circuit protection device: circuit breaker and fuse protects control units when short circuit or overload occurs.
5. Emergency exhaust: manual exhaust to vent the chamber and remove the load in the event of a power outage.

Norms and standards
Manufacturer correspond with quality system certified to GMP Taiwan.
Accessories

  1. Bottom shelf×1
  2. Operation manual×1

Related products